This article explains how to connect a TR905 clock to the internet using Wi-Fi or a Local Area Network connection (ethernet).
Connect with Local Area Network Connection (Ethernet)
Connect with Wi-Fi
1)
2) Use the arrow buttons above the fingerprint and badge reader to navigate to COMM. and then press the OK button to select it.
3) U
6) Wi-Fi password can be entered manually using the keypad on the clock or uploaded to the clock using a USB flash drive.
To enter the password manually, use the arrow buttons to navigate to Password and press OK to select it.
To upload the password using a USB drive, complete the remaining steps in Upload Wi-Fi Password to TR905 using USB Drive.
7) to return to each previous screen until the home screen is displayed.
8) Use the icons in the upper right of the home screen to verify that the clock is connected to Wi-Fi and the Timerack server.
 |  |
Connect with Local Area Network Connection (Ethernet)
1) Press the M/⏎ button to access the Main Menu.
2) Use the arrow buttons above the fingerprint and badge reader to navigate to COMM. and then press the OK button to select it.
 |  |
3) U
4) Default IP Address is 192.168.10.124. If using a Static IP, turn DHCP OFF. IP Address, Subnet Mask, Gateway, and DNS must be populated to connect to the local network.
If network configuration will be Dynamic Host Configuration Protocol (DHCP), use the arrow buttons to navigate to DHCP and then press OK to turn it ON.
5) to return to each previous screen until the home screen is displayed.
6) Use the icons in the upper right of the home screen to verify that the clock is connected to LAN and the Timerack server.
| |