1) Verify the user you are wanting to clock IN/OUT has a fingerprint enrolled. Tap on

the Menu Icon. If you have already verified, skip to step 5.

2) Tap on the Users Icon

3) Find the User from the list of users that you want to clock IN/OUT

using Fingerprint Authentication. Once you have found the user tap on the name.

4) You can see on this screen if the user has a Fingerprint enrolled. It will have a

green checkmark indicating a fingerprint is registered to the user. If you don't see a

green checkmark refer to the Enrolling Fingerprint guide.

5) To clock IN/OUT using Fingerprint Authentication make sure your clock is on the

home screen as shown below. 

6) Place your finger on the Fingerprint Scanner. 

7) Once your fingerprint has been authenticated, you will be presented the following

screen 

8) You can select the appropriate punch type from the screen and once you have

selected the punch it will be verified, and you will get the following confirmation message.